12
Installation
Environmental Requirements
Area of installation
Never install sterilizer near any flammable,
explosive, or corrosive gas components.
Fire, explosion, or other troubles may occur
when turning the breaker on and off.
Area of installation
The sterilizer should not be installed in the
following environments.
① Under direct sun
② In temperatures below 5℃, or above 35℃
③ Where severe changes in temperature occur
④ In very humid or dusty locations
⑤ Under water
⑥ In vibrating or shock areas
Level surface
If the sterilizer is not on a level surface the
heater will reach a high temperature causing
a interruption of the operation.
To Next Page
Loading...