1
Specifications
SM200/300
Model SM200 SM300
System Automatic high pressure steam sterilizer
Sterilization
105℃〜123℃ 105℃〜128℃
Temperature
Setting Range
Drying
150℃〜180℃
Maximum Operational Pressure 0.18MPa (26.1psi) 0.2MPa (29.0psi)
Power Requirement AC115V 13A (50/60Hz) AC115V 17A (50/60Hz)
Controller HiTec IV CR Type Microprocessor Control
Sensor 1 (Chamber Temp.)
Pt100Ωresistance thermometer sensor
Sensor 2 (Water Temp.) Thermocouple (Type T)
Timer
1min. 〜 99hours and 59min. 100 〜 999hours
Heater 1 (Sterilization) 1.3kW 1.7kW
Heater 2 (Drying) 1.0kW 1.5kW
Safety
Main circuit breaker, Over pressure safety valve,
Self-diagnostic circuitry; Monitors any abnormality of the temp sensor,
Low water sensor, SSR, and heater
External Dimensions (W×D×H):
16.1”×18.5”×37.4”
41cm×47cm×95.3cm
17.3”×20.9”×38.0”
44cm×53cm×96.5cm
Internal Dimensions
(Diameter, Depth):
9.4”, 17.5”
24cm, 44.5cm
11.8”, 17.5”
30cm, 44.5cm
Capacity (cu. ft): 0.8 1.2
Capacity (liters): 22 36
Weight
143.3 pounds
65kg
176.4 pounds
80kg
Accessories
Bottle 1
Basket 2
Bottom Plate 1
Steam Saucer
１
Instruction Manual 1
Warranty 1
To Next Page
Loading...
