Yamato VE2713-2-8F User Manual

VE2711-1-8,VE2711-2-8F,VE2713-2-8F,VE2740PR-1-8F,VE2740PR-2-8F
VE2700-8 class
HIGH SPEED SMALL CYLINDER BED INTERLOCK STITCH MACHINE
Instruction Manual
Thank you for purchasing VE2700-8 class. Before using your VE2700-8 class, please read the
instruction manual and understand the contents well.
After reading the instruction manual, please keep it in a location where it is easily accessible
to the operator.

Yamato VE2713-2-8F Specifications

General

Brand	Yamato
Model	VE2713-2-8F
Category	Sewing Machine
Language	English

Summary

Safety Instructions

1. Safety Instruction

General safety guidelines for machine operation and maintenance.

2. Basic precautions

Fundamental precautions for machine use, environment, and personnel safety.

3. Precautions to be taken in various operating stages

Safety measures during unpacking, installation, operation, and maintenance.

5. Safety devices and warning label affixing locations

2. Installation

2.1 Table cutting diagram

2.2 Installing the table top type

2.3 Installing the semi-submerged type

2.7 Eye guard and finger guard

4. Lubrication

4.1 Lubricating oil

Recommended type and usage of lubricating oil for the machine.

4.2 Lubricating

Procedure for lubricating moving parts of the machine.

5. Proper operation

5.1 Needle system

5.2 Installing the needles

5.3 Threading

Procedures for threading the machine's various threads.

5.4 Adjusting the thread tension

How to adjust thread tension for optimal stitch quality.

5.5 Pressure of the presser foot

Adjusting the presser foot pressure for stable sewing.

5.6 Adjusting the position of the presser foot

5.7 Adjusting the movement of the differential feed dog

Adjusting differential feed for gathering or stretching fabric.

5.8 Adjusting the stitch length

Methods for adjusting the stitch length using knobs or levers.

5.15 Cleaning the machine

6. Adjustments

6.1 Needle thread tension

Adjusting needle thread tension via take-up and eyelets.

6.2 Top cover thread tension

Adjusting top cover thread tension and take-up amount.

6.3 Looper thread tension

6.4 Relation between the needle and the spreader

Aligning needles and spreader for proper stitch formation.

6.5 Distance between the needle and the looper

Setting the correct distance between needles and looper.

6.7 Height of the needle

6.8 Back-and-forth position of the needle and the looper

6.9 Needle and needle guard

6.10 Height of the feed dog

6.11 Removing the presser foot and presser foot lift

6.13 Adjusting the walking presser foot (VE2711-8F-WF1)