技术参数
Technical Parameters
1
、电压：
220V~
2
、可移动水箱：
800ml
3
、功率：
25W
3. Power: 25W
4
、除湿面积：＜
20
㎡
4. Dehumidification area: < 20
㎡
5
、除湿量：
200-300ml/24
小时
5. Dehumidification: 200-
6
、工作环境：超过
15℃
，超过
45
％的相对湿度
6. Working environment: over 15℃ and over 45% relative
humidity
7
、 机 身 体 积 ：
160X145X230m
7. Body volume:
8
、水位感应器：当水满时，自动关机并亮起红色指示灯
8. Water level sensor: When the water is full, it will automatically
turn off the machine and turn on the red indicator.
使用说明
Instructions
产品使用最佳条件：温度：大于
15℃
湿度大于：
45%
Optimum conditions for product use: temperature: greater than 15 ℃, humidity: greater than 45%
1
、请将除湿机的接水盒推入除湿机。
1. Please push the water receiving box of the dehumidifier into the dehumidifier.
将电源线插头插入室内交流电源插座，打开除湿机开关，这时指示灯应为蓝色，上面出风口
向外吹风。
Plug the power cord plug into the indoor AC power socket and turn on the dehumidifier switch.
At this moment, the indicator should be blue and the upper air outlet should blow outward.
2
、如果上述情况下指示灯为红色，说明接水盒未装好。
2. If the indicator is red under the above circumstances, the water receiving box is not installed
properly.
3
、当接水盒内的水达到一定位置时，除湿机自动停止工作，红灯亮，此时机器停止工作，可
先切断除湿机电源，然后将除湿机内接水盒取出，拔掉接水盒上的黑色放水盒，倒掉积水，
然后将黑色放水塞塞上。
3. When the water in the water receiving box reaches a certain position, the dehumidifier will
automatically stop working and the red light is on. At this time, the machine will stop working.
First, cut off the power supply of the dehumidifier, then take out the water receiving box in the
dehumidifier, pull out the black water receiving box, pour out the accumulated water, and then
plug the black water receiving box.
4
、擦干除湿机和接水盒，重复上面步骤可重新除湿。
4. Dry the dehumidifier and the water receiving box, and repeat the above steps to dehumidify
again.
To Next Page
Loading...