研凌工控电脑科技
(
深圳
)
有限公司
Chapter I:Hardware installation
Precaution before installation
The motherboard is made up of many sophisticated integrated circuits
and other components that are easily damaged by static electricity, Please
read the manual and prepare the following instructions before
installation:
Please confirm that the size of the chassis is consistent with the
motherboard before installation.
Please do not tear up the serial number and agent warranty sticker on the
motherboard before installation, otherwise it will affect standard of
product warranty.
To install or remove the motherboard and other hardware devices,
please be sure to turn off the power before, and removal of power cord
from outlet. When you install other hardware devices to the motherboard
socket, make sure the interface and socket is closely.
Take the motherboard, please try your best to avoid touching the metal
connection parts to avoid short circuits in the line. Take the motherboard,
central processing unit (CPU) or when the memory, it is best to wear
anti-static bracelet.
If no ESD bracelet, make sure your hands dry, and touch the metal to
dissipate the static charge. Before the boards are not installed, first
placed in anti-static mat or anti-static bags.
When you want to remove the motherboard power supply when the plug
from the socket, make sure that power supply is turned off. In before power
on make sure that the power supply voltage of the voltage value is set
in the area of standard values in make sure all hardware devices before
turning on the power supply cable and the power cord is correctly
connected.
Do not let the screw contacts on the motherboard circuit or part to
To Next Page
Loading...