What to do if my Yanmar Engine has a fuel injection issue?
If your Yanmar Engine is experiencing a fuel injection issue, you should first check the fuel filter for any clogs or damage. Also, make sure that the fuel supply is adequate. Finally, inspect the fuel lines for any leaks.
General| Engine Model | 4JH3CE |
|---|---|
| Manufacturer | Yanmar |
| Number of Cylinders | 4 |
| Fuel Type | Diesel |
| Fuel System | Direct Injection |
| Starting System | Electric Start |
| Type | Diesel |
| Max Output | 40.5 kW @ 3500 rpm |
| Torque | 132 Nm @ 2200 rpm |
| Cooling System | Heat exchanger |
| Alternator Output | 12V |
| Weight | 130 kg |
| Lubrication System | Forced lubrication with gear pump |
Explains the meaning of warning symbols used in the manual for safety.
Provides essential instructions for safe operation and handling of the engine.
Shows the location and part numbers of crucial warning labels on the engine.
Describes the engine's application, installation, and general use in marine setups.
Details the technical specifications for various Yanmar engine models.
Identifies and illustrates the key components and parts of the engine.
Lists essential parts for maintenance and explains their specific functions.
Explains the function and operation of control panels and related equipment.
Covers the selection, handling, and supply procedures for essential engine fluids.
Outlines critical pre-operation checks and initial fluid filling procedures.
Provides instructions for daily pre-start checks and safe engine operation.
Details the correct procedures for storing the engine for extended periods.
General guidelines and principles for performing engine inspections and maintenance.
Summarizes inspection and servicing tasks based on different usage intervals.
Provides detailed procedures for specific periodic inspections at various service intervals.
Specifies the conditions necessary to ensure compliance with emission standards.
To Next Page
