Yanmar 6LY3 series - Control Head Shift and Throttle Functions

PRODUCT OVERVIEW
30 6LY3 Operation Manual
Control Head Shift and Throttle
Functions
Use the two-lever control head
(Figure 11, (4)) in the helm station for
ahead (Figure 11, (1)), astern
(Figure 11, (3)), neutral (Figure 11, (2))
and speed control in a twin installation.
Figure 11
Use the single-lever control head
(Figure 12, (4)) in the helm station for
ahead (Figure 12, (1)), astern
(Figure 12, (3)), neutral (Figure 12, (2))
and speed control in a single installation.
Figure 12
Control Head Button Functions
• N (or NEUTRAL) Button – If the
associated control head lever is in the
“Neutral Idle” position, pushing this
button engages / disengages Neutral
Throttle control, allowing throttle but no
forward or reverse thrust. If the
associated control head lever is in a
“Gear Idle” position, pushing this button
engages / disengages Split Range
Throttle (SRT) (if installed).
• SELECT (or SEL) Button – If the station
is inactive, pushing this button activates
the station (used in conjunction with two
or more control stations).
• SYNC Button – Pushing this button
engages / disengages the Cruise
Synchronization option (if installed)
when the port and starboard control
head levers are set to nearly the same
positions.
0002028
1
3
2
4
0002029
4
3
2
1
Back