8
Safety
instructions
STAY
CLEAR
OF
REAR,
A
PT,
1.
Stop engine and be sure PTO has stopped
before:
a) Connecting or disconnecting PTO shaft.
b) Making any adjustment to PTO drive train
and
3
point hitch.
C) Adjusting, cleaning, and sewicing PTO
driven implements.
2.
Make sure the tractor PTO RPM
is
matched to
the implement's required RPM.
Do not drive or operate implement beyond
recommended PTO
RPM.
3.
PTO
master shield
(A)
should be in place at all
times. PTO shaft safety guard
(B)
should be
installed when PTO system
is
not in use.
To Next Page
Loading...
