Yanmar YM195 - Removing Tractor from Storage

80 Storage
[ 1 1 - 2)REMOVING TRACTOR
FROM STORAGE
Before starting engine, be sure there is plenty of
ventilation. Never operate engine in a closed build-
ing.
Follow these procedures for removing the tractor
from storage:
1) Remove all protective coverings.
2) Remove clutch pedal block and allow
clutch engage.
3) Check tire inflation pressure.
4) Install battery and connect cables. Check
alternator belt tension.
5) Check the oil level of engine crankcase and
transmission-hydraulic system.
6) Fill fuel tank.
7) Check coolant level in radiator,
8) Stan engine as instructed on page 24.