Yanmar YM195 - Safety Instructions; Safety Signs and Symbols

A SAFETY INSTRUCTIONS
A READ SAFETY SIGNS
1. This is the safety-alen symbol. When you see
the symbol on your machine or in this manual.
be alert to the possibility of personal injury and
carefully read the messages that follow.
2. The signal words "DANGER" "WARNING"
"CAUTION"
are used with the safety-alert
symbol.
1) "DANGER" denotes the extreme hazard
which would
result in high probability of
irreparable injury if proper precautions are
not taken.
2) "WARNING" denotes the hazard which
would result in injury if proper precautions
are not taken.
3) "CAUTION" denotes the general precautions.
3. Carefully read all safety messages in this manual
and safety signs on your machine. Follow
recommended precautions to operate machine
safely.
.Keep safety signs in good readable condition.
Replace any missing or damaged safety signs
with
new safety signs which you can purchase at
your YANMAR dealer.