How to fix Yard force Compact 300RB Lawn Mower not docking?
To address docking problems with your Yard force Lawn Mower: 1. Check that the boundary wire under and in front of the charger is in a straight line. 2. Ensure the docking station's position is suitable.
Why is my Yard force Compact 300RB so noisy?
There are several reasons why your Yard force Lawn Mower might be making excessive noise. First, inspect the blade fixing screws and tighten them if they are loose. Also, check the blades for any damage and replace them if needed. Increasing the cutting height may also reduce the noise. If these steps don't help, it's possible that the cutting motor has failed, and you should call after sales service. As an alternative, mow the lawn with an ordinary lawnmower firstly, choosing a cutting height just above the desired cutting height.
What to do if Yard force Lawn Mower runs in circles?
If your Yard force Lawn Mower is running in circles, there are a few things you can check. First, make sure that no power cable runs parallel and close to the boundary wire. Also, check to see if a front wheel is stuck. You can also try setting your docking station and Robotic Mower to the alternative boundary signal. If none of these steps resolve the issue, the driving motor may be damaged, and you should contact customer support.
How to fix Yard force Lawn Mower if it cannot dock?
If your Yard force Lawn Mower is having trouble docking, check that the boundary wire under and in front of the charger is in a straight line. Also, ensure that the docking station's position is suitable as explained in this manual.
What to do if Yard force Compact 300RB returns to docking station immediately?
If your Yard force Lawn Mower remains at or returns to the docking station immediately after pressing START, it might be because the mower has already completed its programmed working time for the day. Another possibility is that the battery is very low.
What to do if Lift-sensor triggered on Yard force Compact 300RB Lawn Mower?
If the lift-sensor is triggered on your Yard force Lawn Mower, it could be due to grass that is too high and dense (taller than 60 mm), which may cause the mower to lift. Mow the lawn with an ordinary lawnmower. Also, check that the mower is free from obstructions.
Why Yard force Lawn Mower remains at docking station after pressing START?
Your Yard force Lawn Mower might stay at the docking station after you press START because it has already completed its programmed working time for the day, or the battery is very low. Check these two things to resolve the issue.
What to do if Yard force Lawn Mower is very noisy?
If your Yard force Lawn Mower is making a lot of noise, here are a few things to check: 1. Make sure the blade fixing screws are tight. 2. Look at the blades for any damage and replace them if needed. 3. If the grass is too high, increase the cutting height. You might need to mow the lawn with a regular lawnmower first, setting it to a height just above what you want.
General| Brand | Yard force |
|---|---|
| Model | Compact 300RB |
| Category | Lawn Mower |
| Language | English |
To Next Page