4
IMPORTANT
Please read these instructions fully before assembling and operating.
Description Of Symbols
Symbols are used in this manual to attract your attention to possible risks. The safety
symbols and the explications which accompany them must be perfectly understood.
The warning themselves do not prevent the risks and cannot be a substitute for proper
methods of avoiding accidents.
Warning symbols on the machine
Before any use, refer to the corresponding paragraph in the present manual.
This symbol, before a safety comment, indicates a precaution, a warning or
a danger. Ignoring this warning can lead to an accident you’re yourself or for
others.
Wear ear and eye protection when operating the reciprocating saw.
In very dusty work environments, always wear a breathing mask.
Do not expose and operate the tool in rain.
Keep bystanders a safe distance away from the power tool.
Keep away hands from moving parts.
The tool is intended for cutting wood, plastic and building materials .The tool is suitable
for rough saw cuts, straight or curved cuts, and ush surface cuts. Used with the clamping
jaw the tool is suitable for cutting branches
For safety reasons it is essential to read the entire instruction manual before rst operation
and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial trade use. It
must not be used for any purposes other than those described.
INTENDED USE
SAFETY INFORMATION
To Next Page
Loading...
Need help?
General