Yard Machines 13A1762F500 User Manual (English)

Questions and Answers:

B
Brandon TurnerAug 13, 2025
Why won't my Yard Machines 13A1762F500 Lawn Mower engine start?
- C
  cperkinsAug 13, 2025
  If your Yard Machines Lawn Mower engine won't start, there are several things you can check: * Ensure the PTO lever is in the disengaged (OFF) position. * Engage the parking brake. * Connect the wires to the spark plug(s). * Place the throttle control in the CHOKE position. * Fill the tank with clean, fresh gasoline (less than 30 days old). * Clean the fuel line or replace the fuel filter, if equipped. * Clean, adjust the gap, or replace the spark plug. * Crank the engine with the throttle in the FAST position.
M
Melissa SandovalAug 17, 2025
Why does my Yard Machines 13A1762F500 Lawn Mower engine run erratically?
- J
  Jacob FisherAug 17, 2025
  An erratic running engine in your Yard Machines Lawn Mower can often be resolved by checking the following: * Move the throttle control out of the CHOKE position. * Connect and tighten the spark plug wire(s). * Clean the fuel line and fill the tank with clean, fresh gasoline (less than 30 days old). * Replace the fuel filter, if your mower is equipped with one. * Clear the vent or replace the cap if it's damaged. * Drain the fuel tank and refill it with clean, fresh gasoline (less than 30 days old). * Replace the air cleaner cartridge/element or clean the pre-cleaner, if equipped.
S
Scott YatesAug 20, 2025
Why is my Yard Machines Lawn Mower engine overheating?
- K
  Kimberly ChandlerAug 20, 2025
  If your Yard Machines Lawn Mower engine is overheating, ensure you: * Fill the crankcase with the proper capacity and weight of oil. * Clean grass clippings and debris from around the engine’s cooling fins and blower housing.

Yard Machines 13A1762F500 Specifications

General

Engine Type	4-Cycle
Deck Material	Steel
Drive Type	Self-Propelled
Discharge Options	Side Discharge, Mulching, Bagging
Cutting Height Positions	6
Oil Capacity	20 oz
Mulching Capability	Yes
Side Discharge Capability	Yes
Bagger Capability	Yes
Cutting Width	21 inches
Cutting Height	1.25 - 3.75 inches
Wheel Size	7 x 8 in