Yard Machines Series 580 User Manual

YARD
OPERATOR'S MANUAL
Edger
Model Series 580
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered,
brush-covered or grass*covered land unless the engine's exhaust system is equipped with a spark attester meeting applicable local or
state laws (if any). If a spark attester is used, it should be maintained in effective working order by the operator. In the State of California
the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws
apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the
service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U.S.A. FORM NO. 770-10397A
(10/00)

Yard Machines Series 580 Specifications

General

Brand	Yard Machines
Model	Series 580
Category	Edger
Language	English

Summary

Finding Model Number

Calling Customer Support

Section 1: Important Safe Operation Practices

Training

Read, understand, and follow all instructions before operating the machine.

Preparation

Inspect the area and wear appropriate safety gear before starting operation.

Operation

Adhere to safety rules regarding moving parts and operational procedures.

Maintenance and Storage

Check safety devices, disconnect spark plug, and follow maintenance guidelines.

Section 2: Assembling Your Edger

Grounding the Engine's Spark Plug

Disconnect and ground the spark plug wire before servicing the engine.

Positioning the Edger Handles

Assemble the upper and lower handles using wing knobs and secure them.

Clutch Rod Adjustment

Adjust the clutch rod to ensure the blade does not turn when disengaged.

Section 3: Know the Edger

Engine Controls

Includes throttle, choke, and pull starter for engine operation.

Blade & Depth Controls

Blade clutch/depth lever for engagement and cut depth.

Adjustment Levers

Blade angle and curb height adjustment levers.

Section 4: Operating the Edger

Wear Your Safety Glasses

Protect eyes from thrown objects during operation.

Adding Gasoline And Oil

Service engine with fuel and oil as per manual instructions.

Starting The Engine

Detailed steps for starting the edger's engine using controls.

Stopping The Engine

Procedure to safely stop the edger's engine.

Section 5: Making Adjustments

Front Wheel Adjustment

Adjust front wheel position for specific operational needs.

Engaging the Edger Blade

How to engage and disengage the edger blade using the control lever.

Blade Angle Adjustments

Adjust blade angle for trenching, edging, beveling, or trimming.

Curb Wheel Adjustment

Adjust curb wheel height for edging along curbs.

Section 6: Maintaining & Servicing the Edger

Lubrication

Engine, wheels, front axle, and pivot points require lubrication.

Cutting Head Bearings

Bearings are factory lubricated and sealed.

Spindle Shaft

Lubricate spindle shaft spacers and spring area frequently.

Replacing the Edger Blade

Steps to remove and install a new edger blade.

Replacing the Drive Belt

Procedure for replacing the drive belt due to wear.

Section 7: Off-Season Storage

Preparation for Storage

Clean, lubricate, and coat blade for long-term storage.

Section 8: Troubleshooting

Engine Fails to Start

Common causes and corrective actions for engine starting issues.

Engine Runs Erratic

Troubleshooting steps for inconsistent engine operation.

Engine Overheats

Causes and fixes for engine overheating problems.

Excessive Vibration

Reasons for excessive vibration and recommended solutions.

Drive Belt Slips

Identifying and fixing drive belt slippage.

Section 9: Model Series 580 Parts List

Manufacturer's Limited Warranty

Obtaining Service

Instructions on how to get warranty service with proof of purchase.

Warranty Exclusions

Cases not covered by the limited warranty.

State Law Relation

How state law affects warranty rights.