Yard-Man 31AH763G401 User Manual

YaRD-MaN
Operator's Manual
Snow Thrower
Models
31AH763G401
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
Warning; This unit isequipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system isequipped with a spark arrester meeting
applieabIe local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark attester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U,S.A. FOF',M NO. 770-10021B
ECONo.1481 (6/2000)

Yard-Man 31AH763G401 Specifications

General

Intake Height	21 inches
Electric Start	Yes
Auger Material	Steel
Chute Control	Crank
Forward Speeds	6
Reverse Speeds	2
Headlight	Yes
Stages	Two-Stage
Engine Type	4-Cycle
Drive System Type	Friction Disc
Fuel Tank Capacity	0.5 gallons

Summary

Section 1: Important Safe Operation Practices

Training

Preparation

Operation Safety

Section 2: Assembling Your Snow Thrower

Final Adjustments

Traction and Shift Lever Adjustment

Adjusting traction control and shift lever for proper engagement and movement.

Auger Control Adjustment

Adjusting the auger control cable for correct auger engagement.

Section 4: Operating Your Snow Thrower

Starting and Stopping the Engine

Covers pre-start checks, electric/recoil starting, and engine shutdown.

Engaging Drive Systems & Operation Tips

How to engage track drive, augers, and best practices for operation.

Section 5: Making Adjustments

Traction & Auger Control Adjustment

Skid Shoe & Shift Rod Adjustment

Section 6: Maintaining Your Snow Thrower

Lubrication & Gear Case Maintenance

Auger, Belt & Wear Component Service

Drive Belt & Friction Wheel Service

Section 9: Troubleshooting

Engine Troubleshooting

Diagnosing and resolving engine start, running, and power issues.

Operational Troubleshooting

Troubleshooting unit propulsion, discharge, and chute turning problems.