Do you have a question about the Yard-Man YM20CS and is the answer not in the manual?
Essential safety guidelines for operating the trimmer, including personal protection and area preparation.
Precautions for handling gasoline and fueling the unit to prevent fire and explosion hazards.
Guidelines for safe operation of the trimmer, including starting, handling, and avoiding hazards.
Additional safety advice, including storage, transport, and general unit care.
Details on proper fuel and oil types, mixing ratios, and handling precautions for the 2-cycle engine.
Step-by-step guide for correctly mixing gasoline and 2-cycle oil for optimal engine performance.
Describes the various uses and tasks the trimmer can perform, such as cutting grass and edging.
Steps to correctly attach and position the D-handle for comfortable and safe operation.
Instructions for securely mounting the cutting attachment shield for operator safety.
Guidance on using the EZ-Link system to attach and detach various accessories.
Procedure for safely disconnecting cutting attachments or accessories from the EZ-Link coupler.
Steps for securely attaching cutting attachments or accessories to the EZ-Link coupler.
Procedures for priming, choking, and pulling the starter rope to start the trimmer engine.
How to properly shut down the trimmer engine using the stop control.
Correct posture and grip for operating the trimmer safely and effectively.
Method for extending the trimmer line using the bump head mechanism during operation.
Techniques and advice for efficient cutting, line wear, and engine performance.
Specific technique for trimming around trees, posts, and fences at a 30-degree angle.
Table outlining required maintenance tasks and their recommended frequencies.
Instructions for replacing the trimmer line, covering both SplitLine and standard single line.
Procedures for removing, cleaning, and reinstalling the air filter and cover.
Steps for accessing, cleaning, and reinstalling the spark arrestor screen and hood.
Guidance on adjusting the idle speed screw for proper engine idling.
Procedure for removing, inspecting, and replacing the spark plug.
Instructions for cleaning the trimmer and preparing it for storage.
Common causes and actions for when the trimmer engine fails to start.
Troubleshooting steps for when the engine does not run smoothly at idle speed.
Causes and solutions when the trimmer engine fails to increase speed.
Diagnosing and fixing issues where the engine loses power or stops during operation.
Troubleshooting for problems with the line not extending from the cutting head.
Identifying and resolving issues where the cutting line extends excessively.
Detailed technical data for the trimmer's engine, including type, displacement, and fuel ratio.
Technical details for the drive shaft, cutting mechanism, and line specifications.
Details on what the limited warranty covers, its duration, and common exclusions.
Instructions on how to access warranty service through authorized dealers.
Information on how state laws relate to warranty rights and legal protections.