44
PARTS REQUIRED:
EAVE SOFFIT
x48
Place and sof t boards primed side down on bottom side of rafter and nailer.
Flush sof t board to front corner of overhang L-block , side wall panels and nailer .
Secure with 1-1/4" screws spaced 12" apart and angled into rafter at seam .
1
Repeat steps to install soffi ts on opposite side.
Your eave sof t panels are installed.
FINISH
x2
3/8 x 5-3/16 x 71-1/4" (1 x 13,2 x 181 cm)
x2
3/8 x 5-3/16 x 79-3/4" (1 x 13,2 x 202,6 cm)
Flush to
outside
Screws
(30,5 cm)
SIDE VIEW
Screws
Primed Side
Down
Screws
1-1/4" (3,2 cm)
Flush at
corner
Flush
Install all trim and soffi t parts with the primed side facing outward.
HINT:
Pre drill to avoid
3/16" (4,8 mm) Drill Bit
To Next Page
Loading...