YARDLOCK GATE LOCK - User Manual

Gate Swinging Out
Porte à ouverture vers l’extérieur
Portón que abre así afuera
1-844-608-5553
sales@yardlock.com
www.yardlock.com
9.5 mm
&
3.5 mm
Wood bits
Mèche à bois
Broca para madera
#2
Phillips screwdriver
Tournevis à tête Phillips no 2
Destornillador Phillips No 2
Tape measure
Ruban à mesurer
Cinta métrica
Latch assembly
Ensemble du loquet
Ensamble de pestillo
Latch cover
Couvercle du pêne
Cabezal del pestillo
Yardlock
Screws
Vis
Tornillos
A
B
C
D
E (12x)
F (1x)
Required tools
Outils nécessaires
Herramientas necesarias
Parts in the box
Pièces dans la boîte
Piezas
GATE LOCK
Installation Guide
Guide d’installation
Guía de instalación
Video Instructions
Vidéo d’instructions
Video de instrucciones
Insert latch arm into latch and position on gate.
Insérez le bras du loquet
Inserte el brazo en el pestillo y posiciónelo en el portón.
Latch arm
Bras du loquet
Brazo del pestillo
Gate
Porte
Portón
Post
Poteau
Poste
Latch
Loquet
Pestillo
INTERIOR
INTÉRIEUR
INTERIOR
Secure latch assembly with supplied screws.
Fixez l’ensemble du loquet avec les vis fournies.
Fije el ensamble de pestillo usando los tornillos proporcionados.
508 mm minimum
508 mm minimum
al menos 508 mm
89 mm minimum
89 mm minimum
al menos 89 mm
B
E (6x)
A
3 mm
Pilot holes (6x)
Trous de guidage (6x)
Agujeros guías (6x)
Top of gate
Haut de la porte
Parte superior del
portón
1.1 1.2
1 / 4
Install latch assembly on gate interior.
Installez l’ensemble du loquet sur la face intérieure de la porte.
Monte el pestillo en el interior del portón.
1
Recommendations
If you have an out-swinging gate, it is recommended that
you reverse your hinges to create an in-swinging gate for
added security.
The following instructions are for OUT-SWINGING gates.
Instructions for IN-SWINGING gates are available at
www.yardlock.com
Recommandation
Si vous avez une porte qui s’ouvre vers l’extérieur, il vous
est recommandé d’inverser vos charnières an de créer
une porte qui s’ouvre vers l’intérieur pour plus de sécurité.
Les instructions suivantes concernent les portes qui
s’ouvrent VERS L’EXTÉRIEUR. Pour des instructions
concernant les portes qui s’ouvrent VERS L’INTÉRIEUR,
consultez le www.yardlock.com
Sugerencias
Si su portón abre así afuera, le aconsejamos invertir las
bisagras para crear un portón que abre así adentro, para
mayor seguridad.
Las directrices siguientes son para portones que ABREN
ASÍ AFUERA. Directrices para los portones que ABREN
ASÍ ADENTRO se encuentran en www.yardlock.com

YARDLOCK GATE LOCK Specifications

General

Brand	YARDLOCK
Model	GATE LOCK
Category	Locks
Language	English

Summary

Install latch assembly on gate interior

Insert latch arm into latch and position on gate

Positioning the latch arm into the latch mechanism on the gate interior.

Secure latch assembly with supplied screws

Fastening the latch assembly to the gate using provided screws.

Drill hole for cable

Mark the point where the catch meets the gate

Identifying and marking the gate location for cable passage.

Drill hole through gate

Creating a hole in the gate for the control cable.

Install latch and latch cover

Push cable through gate

Guiding the cable through the drilled hole in the gate.

Mount latch cover on Gate above latch

Attaching the latch cover to the gate above the main latch.

Install Gate Lock

Unlock Gate Lock with default combination

Opening the Gate Lock using the default 0-0-0-0 combination.

Push cable through large hole in Gate Lock

Feeding the cable through the main opening of the Gate Lock.

Mount Gate Lock on gate with holes aligned

Securing the Gate Lock to the gate by aligning mounting holes.

Secure cable

Fastening the cable to the gate post using screws.

Set a new combination

Remove rubber cover and move lever to learn position

Preparing the lock for a new combination by adjusting the lever.

Close Gate Lock and rotate dials to desired combination

Setting the new combination by turning the lock dials.

Open Gate Lock, move lever to original position, and install rubber cover

Finalizing the combination setting and reattaching the cover.

Normal Operation

Enter code

Inputting the correct code to unlock the gate lock.

Open Gate Lock and gate

Unlocking the gate lock and opening the gate.

Close Gate Lock

Securing the gate lock after use.

Scramble dials

Rotating the dials to obscure the code after closing.

Close shutter

Closing the shutter covering the lock dials.

Close gate

Securing the gate itself.