Problem Cause Remedy
Auger fails to stop
within 5 seconds
after auger clutch is
released
Auger clutch cable out of adjustment Adjust auger clutch cable.
Snow thrower fails to
discharge snow
1. Discharge chute clogged.
2. Auger jammed
3. Auger clutch cable not adjusted
properly
4. Auger belt loose or damaged
5.
Auger rubber paddles worn or damaged
6. Throwing too much snow
7. Trying to remove extremely heavy
or wet snow
8. Auger is frozen in place
1. Unclog discharge chute
2. Remove debris or foreign object from
auger
3. Adjust auger clutch cable
4. Replace auger belt
5. Replace rubber paddles
6. Reduce width of swath
7. Do not overload with extremely heavy
or wet snow
8. Move unit to a warm place to thaw
19
|
Troubleshooting
30230US25M100.indd 19 2016/9/3 11:04:18
To Next Page
Loading...
Need help?
General
