model number 060-1723-0 | contact us: 1.866.523.5218 model number 060-1723-0 | contact us: 1.866.523.5218
9
1.4 Maintenance
a) Check the blade and the motor mounting
bolts at frequent intervals for proper
tightness.
b) Keep all nuts, bolts, and screws tight
to ensure the mower is in safe working
condition.
c) Check bag frequently for deterioration
and wear, and replace worn bags.
Check that replacement bags comply
with the original manufacturer’s
recommendations or specications.
d) Replace the blade if it is bent or cracked.
An unbalanced blade causes vibration
that could damage the motor drive unit
or cause personal injury.
e) Sharpen a dull blade equally at each
end to maintain the balance.
f) Clean the blade thoroughly and check
its balance by supporting it horizontally
on a thin nail through its centre hole.
The nail should also be in a horizontal
position. If either end of the blade rotates
downward, remove some metal from
the heavy or lower end until the blade
is balanced. It is balanced when neither
end drops.
Product Safety
To Next Page
Loading...
Need help?
General
