This document is an instruction manual for the Yardworks 24" (61 cm) Hedge Trimmer, model number 060-1979-2. It provides essential information for safe operation, maintenance, and troubleshooting of the device.
Function Description:
The Yardworks 24" (61 cm) Hedge Trimmer is a cordless, battery-operated garden tool designed for cutting and trimming hedges and bushes in domestic use. It is intended to provide dependability and performance for maintaining garden landscapes. The device features a 24-inch blade length, allowing for efficient trimming of various hedge sizes. It is designed to be used with specific Yardworks battery packs and chargers, ensuring compatibility and optimal performance. The trimmer emphasizes user safety with features like a safety guard, a lock-off button, and a rotating rear handle for versatile cutting angles.
Important Technical Specifications:
- Model Number: 060-1979-2
- Voltage: 48V
- No Load Speed: 2800 /spm (strokes per minute)
- Cutting Diameter: 1" (25 mm)
- Blade Length: 24" (61 mm)
- Machine Weight: 10 lb 15 oz (4.5 kg)
- Suitable Battery Packs (Not Included):
- 060-1987-2 (2.0 Ah)
- ABP4830SH (3.0 Ah)
- 060-1988-0 (4.0 Ah)
- ABP4850SH (5.0 Ah)
- 060-1989-8 (6.0 Ah)
- Suitable Chargers (Not Included):
- 060-1990-2 (Input: 120 V~, 60 Hz, 110 W; Output: 48 V, 2 A)
- 060-1992-8 (Input: 120 V~, 60 Hz, 320 W; Output: 48 V, 6 A)
- Charger Protection Class: II/
Usage Features:
The hedge trimmer is designed for ease of use and safety during operation.
- Battery Installation and Removal: The battery pack slides into the tool's battery port with a simple push. Removal is achieved by pressing the battery pack release button.
- Blade Sheath: A blade sheath is provided for safe storage and transport, and must be removed before operation.
- Starting and Stopping: To start the hedge trimmer, the user must press and hold the lock-off button and then press the ON/OFF switch lever. To stop, release either the safety handle switch or the ON/OFF switch.
- Rotating Rear Handle: The trimmer features a rotating rear handle that can be adjusted to 5 angles (0°, 45°, 90°, 135°, 180°). This allows for comfortable and effective cutting at various orientations, particularly useful for side cutting.
- Trimming Technique:
- New Growth: Use a wide sweeping action to feed stems directly into the blade.
- Full Speed: Allow blades to reach full speed before cutting.
- Direction: Work away from people and solid objects.
- Stalling: If the blade stalls, immediately stop the trimmer, remove the battery, and clear jammed debris.
- Over-sized Stems: Avoid cutting stems too large for the blade.
- Top Cutting: Use a wide sweeping motion with a slight downward tilt for best results.
- Side Cutting: Begin at the bottom and cut upwards, tapering the hedge inward at the top for uniform growth.
- Safety Precautions:
- Always hold the trimmer with both hands.
- Wear safety glasses or eye shields, and hearing protection.
- Keep children and bystanders away from the work area.
- Do not operate in explosive atmospheres or wet conditions.
- Ensure proper footing and balance.
- Dress properly, avoiding loose clothing or jewelry.
- Do not overreach.
- Always remove the battery pack before making adjustments, changing accessories, or storing the tool.
- Do not return the product to the store for problems; contact customer service.
Maintenance Features:
Proper maintenance ensures the longevity and safe operation of the hedge trimmer.
- Cleaning and Storage:
- Clean the unit with water after each use.
- Clean the hedge trimmer immediately after use.
- Brush the blade using a stiff nylon brush to remove any debris.
- Store the hedge trimmer in a secure, dry place out of reach of children.
- Do not place other objects on top of the machine.
- Inspect the hedge trimmer before each use.
- Have the unit professionally repaired if any damage occurs.
- The blade rail should be cleaned and treated with fine oil after each use.
- Use the blade sheath for transportation and storage.
- Lubricating the Cutting Blade: For longer life and easier operation, lubricate the cutting blades before and after each use. Ensure the battery pack is removed before lubrication. Apply oil so it runs between the two blades. Common light duty/machine oil can be used.
- Battery Care:
- Recharge only with the specified charger.
- Do not expose battery packs to fire or excessive temperature (above 130 °C).
- Store battery packs in a cool, dry place, away from other metal objects.
- Fully charge the battery or to no less than half charge before storage.
- Charge the battery every 3-6 months if not used for long periods.
- Allow hot battery packs to cool before recharging.
- Do not use damaged or modified battery packs.
- Blade Sharpening: Routine maintenance includes blade sharpening.
- Warranty: The product comes with a five-year limited warranty for defects in material or workmanship (excluding battery). The battery has a three-year limited warranty. Normal wear parts (blade, safety guard) have a one-year warranty.
- Recycling: Yardworks Canada partners with the RBRC Corporation to recycle Li-ion batteries. Do not discard batteries in the trash; call 1-800-822-8837 for free disposal service.
Need help?
To Next Page
General