Yardworks 060-2279-2 Owner's Manual

11
Edging (See Figure 12 & Figure 13.)
For edging, push the button and rotate the handle. The handle will rotate to 90°, 180° position, while
releasing the button. When the hand is in position, the button will lock into place. The hand will only rotate in
one direction. Do not use the heavy duty cutting system for edging.
3-position adjustment (See Figure 14.)
1. Push the yellow button
2. Adjust handle to the desired angle
3. Release the button. The handle locks in position.
Secure the power cable (See Figure 15.)
Form a loop in the end of the extension cable, conduct it through the opening in the upper handle and hang
it on to the strain relief.

Yardworks 060-2279-2 Specifications

General

Brand	Yardworks
Model	060-2279-2
Category	Trimmer
Language	English