7
WARNING:
Electrical Information
USE PROPER CIRCUIT PROTECTION TO AVOID THE RISK OF
ELECTRICAL SHOCK, FIRE OR DAMAGE TO THE TOOL. THE DETHATCHER IS
WIRED AT THE FACTORY FOR 120 V OPERATION. CONNECT TO A 120 V, 15 A
CIRCUIT AND USE A 15 A TIME-DELAYED FUSE OR CIRCUIT BREAKER.
REPLACE A CUT, WORN OR DAMAGED POWER CORD IMMEDIATELY TO
AVOID SHOCK OF FIRE.
WARNING:
TO AVOID INJURY, USE ONLY IDENTICAL REPLACEMENT
PARTS WHEN SERVICING THE DETHATCHER.
TOLL-FREE HELPLINE: 1-866-523-5218.
WARNING:
TO AVOID ELECTRIC SHOCK:
1. Use only identical replacement parts when servicing a tool with double insulation.
Servicing should be performed by a qualified technician.
2. Do not use in wet or damp areas or expose to rain.
WARNING:
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF
NORMAL SAFETY PRECAUTIONS WHEN OPERATING THIS TOOL.
This dethatcher has a plug that looks like the one shown in Fig. 1.
The dethatcher is double insulated to provide a dual thickness of insulation between
you and the tool’s electrical system. All exposed metal parts are insulated from
internal motor components using protective insulation.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper
outlet installed by a qualified electrician.
DOUBLE INSULATED
Fig. 1
1) 2-prong plug
2) Extension cord
To Next Page
Loading...
Need help?
General
