Need help?Do you have a question about the Yardworks 400 Series and is the answer not in the manual?
General| Brand | Yardworks |
|---|---|
| Model | 400 Series |
| Category | Lawn Mower |
| Language | English |
Covers safe usage, area inspection, operator zone, and personal protective equipment.
Raise and secure upper handle, attach hairpin clips and carriage bolts.
Route the starter rope through the guide and secure with the wing nut.
Attach rear wheels to the axle, securing with nuts and washers.
Assemble the grass bag to the frame and attach it to the mower.
Convert to side discharge by attaching the deflector and mulching plug.
Service the engine with fuel and oil as per manual. Read instructions carefully.
Attach spark plug wire, prime engine, depress blade control, pull starter rope.
Release the blade control handle to stop the engine and blade.
Chopping grass clippings fine and blowing them back into the lawn for fertilization.
Adjust wheel height for nine different cutting positions. Ensure all wheels match.
Lubricate wheels, blade control handle pivot points, and brake cable.
Ensure blade control operates freely and maintain the cutting blade condition.
Covers issues like engine failing to start, running erratically, or overheating.
Addresses vibration, poor mulching, uneven cuts, and wheel propulsion.
Covers defects in material/workmanship for four years, with exclusions for misuse and normal wear.
Specifies warranty periods for batteries and normal wear parts like blades and belts.
Procedure to obtain service, requiring proof of purchase and contact with dealers.
To Next Page