Why is my Yardworks Pole Saw bar and chain running hot and smoking?
If the bar and chain of your Yardworks Pole Saw are running hot and smoking, it could be due to the chain tension being too tight or the bar lube reservoir being empty. To resolve this, tension the chain as described in the Chain Tension section of this manual and check the bar lube reservoir.
What to do if my Yardworks Pole Saw motor runs, but the chain is not rotating?
If the motor of your Yardworks Pole Saw runs but the chain doesn't rotate, the chain tension might be too tight, or there might be damage to the guide bar and chain assembly. Retention the chain as described in the Chain Tension section of this manual. Inspect the guide bar and chain for damage and refer to Replacing the Bar and Chain section of this manual.
General safety guidelines and precautions before operating the tool.
Guidelines on grip, stance, preparation, and basic steps for making cuts.
Specific techniques and precautions for trimming branches and limbs safely.
Detailed steps for charging the battery pack using the provided charger.
How to check and adjust the chain tension for optimal performance and safety.
Step-by-step instructions for removing and installing the guide bar and saw chain.
To Next Page
General