6 Using the Copy Function
16 YASKAWA ELECTRIC TOBPC73060025B USB Copy Unit Technical Manual
•Copy
Press and hold the Copy button for one second to write
parameter settings from the copy unit to the drive. While saving
settings from the copy unit to the drive, “ ” will flash on
the display screen.
◆ Drive LED Display and Meaning
Use the table below to understand the drive LED when the copy
unit is connected.
Display Description
CoPy Writing parameter settings (flashing)
CPEr
Control mode of the drive does not match
the copy unit
<1>
CPyE
Error writing data
<2>
CSEr
Error occurred in the copy unit
<3>
dFPS
Drive model does not match to the anothe
drive
<1>
End Task completed
iFEr
Communication error between copy unit and
drive
To Next Page
Loading...