5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 35B YASKAWA AC Drive Option LED Operator Installation Manual 17
◆ LED Operator Option Dimensions
Figure 5
Figure 5 Dimensions
◆ Installing the LED Operator Option
There are two different installation methods for the LED Operator Option depending on the
application.
1. External/Face-mount: Mounted outside a panel.
2. Internal/Flush-mount: Mounted inside a panel.
Table 7 LED Operator Option Installation Methods
<1> Use only Yaskawa cables or cables recommended by Yaskawa. Refer to Item Names and Part Numbers (Sold
Separately) on page 10
Installation Method Description Notes
External/Face-mount
Simplified installation with the LED Operator is
mounted on the outside of the panel with two
screws.
–
S / N : J007XE273710001
90 (3.54)
78 (3.07)
60 (2.36)
7.9
(0.31)
minimum
50 (1.97)
Unit: mm (in)
12.2
(0.48)
1.6 (0.06)
Installation holes (2-M3 screws, dept h 5 (0. 2))
44 (1.73)
15 (0.59)
<1>
To Next Page
Loading...