Need help?Do you have a question about the Yazoo/Kees ZEKH4824 and is the answer not in the manual?
General| Brand | Yazoo/Kees |
|---|---|
| Model | ZEKH4824 |
| Category | Lawn Mower |
| Language | English |
General definitions and notes on product changes.
Information on authorized retail stores and service.
Location and importance of manufacturing and serial numbers.
Explains the meaning of warning and informational symbols.
Identifies symbols for basic operational controls and indicators.
Safety warnings, certifications, and hazard symbols.
Symbols indicating recommended personal protective equipment.
Essential operational and safety symbols.
Critical safety warnings for operation and potential hazards.
General safety instructions and warnings for operation.
Core safety practices for operating the machine.
Important safety guidelines for operation and maintenance.
Recommended protective gear for safe operation.
Critical safety procedures for operating on slopes.
Safety measures to protect children during operation.
Procedures for safely handling fuel.
General safety practices during maintenance.
Safety precautions when working with the battery.
Guidelines for safely transporting the machine.
Owner's duties regarding safety and maintenance.
Identifies the location of various controls on the machine.
Explains the operation of steering and speed control levers.
How to adjust the mower deck cutting height.
Controls engine speed and blade rotation.
Used for cold starts to enrich the fuel mixture.
Used to start and stop the engine.
Tracks operating time and indicates maintenance intervals.
Engages and disengages the mower deck blades.
Location and function of the machine's fuses.
Controls fuel flow to the engine.
Engages the brake to hold the machine stationary.
Details on fuel capacity, type, and safety.
Mechanism for adjusting the operator's seat position.
Guidance for new operators on zero-turn mowers.
How to operate the steering controls for movement and turning.
Basic forward and backward movement using control levers.
Procedure for turning the machine to the right.
Procedure for turning the machine to the left.
How to perform a zero-degree turn.
Pre-operation checks and conditions required before starting.
Step-by-step instructions for starting the engine.
Setting steering controls to the neutral, locked position.
Adjusting the throttle for engine speed.
Engaging the choke for cold engine starts.
Opening fuel valve and turning ignition to start.
Turning the ignition key to start the engine.
Releasing the ignition key to the run position after starting.
Gradually disengaging the choke after the engine starts.
Adjusting engine speed using the throttle.
Troubleshooting weak battery issues.
Procedure for jump-starting the mower using jumper cables.
Steps for operating the machine once the engine is running.
Engaging the mower deck for operation.
Safety guidelines for operating on inclined terrain.
Advice for optimal mowing results and techniques.
Procedures for safely shutting down the engine.
How to move the machine manually.
Engaging/disengaging bypass linkages for manual movement.
A schedule of routine maintenance tasks and intervals.
Critical safety checklist before performing maintenance.
Information on battery maintenance, cleaning, and charging.
How the machine's safety systems function.
Inspection and replacement of V-belts.
Steps to remove the mower deck belt.
Steps for installing the mower deck belt.
Importance of blade sharpness and condition for mowing.
Procedure for replacing mower blades.
Adjustment of anti-scalp rollers for deck height.
Inspection and maintenance of caster wheels.
Recommended tire pressure for optimal performance.
Daily inspection for loose or missing hardware.
How to level and adjust the mower deck.
Maintenance instructions for the engine.
Procedures for cleaning the machine.
Schedule for lubricating various machine components.
Lubrication points for the front wheel mounts.
Lubrication of front wheel bearings.
Lubrication points for the deck spindles.
Causes and solutions for engine starting failure.
Causes for starter motor not engaging the engine.
Reasons and fixes for rough engine operation.
Potential causes for reduced engine power.
Causes of excessive machine vibration.
Causes and solutions for engine overheating.
Troubleshooting battery charging issues.
Causes for slow or erratic machine movement.
Troubleshooting mower deck engagement problems.
Causes of oil leaks from the transaxle.
Reasons for uneven grass cutting.
Procedures for preparing the machine for winter storage.
Recommendations for post-storage service and parts ordering.
Explanations for symbols used in the schematic.
Illustrates different positions of the ignition key switch.
Specifications for the engine manufacturer, type, and fuel.
Specifications for the transmission, brakes, and tires.
Details on cutting width, height, blades, and seat.
Information on the machine's output capacity.
Physical dimensions and weight of the machine.
Information on available accessories.
Recommended torque values for various fasteners.
Information on compliance labels and requirements.
Details on CE compliance and directives.
Checklist for initial delivery service.
Maintenance tasks for the first 5-8 hours of operation.
Maintenance tasks for the 25-hour service interval.
Maintenance tasks for the 50-hour service interval.
Maintenance tasks for the 100-hour service interval.
Maintenance tasks for the 300-hour service interval.
Annual maintenance tasks.
To Next Page