27
FAQ
1.The control box cannot be searched.
① Check whether the control is turned on normally,
the blue light of the power button is always on, and
the Bluetooth light is flashing.
② Whether the control box has been connected to
other equipment before, it can be reconnected after
disconnecting from other equipment.
③ Check the phone or tablet settings, security
and location information to ensure that the location
information is turned on.
2.There is electric noise during EMS training.
① Never wear metal objects such as necklaces and
bracelets during training.
② It is recommended to wear disposable underwear,
women with thin chest pads or chest stickers.
3.Stinging sensation during training.
① Determine whether the electrodes are completely
attached to the skin. If they are not attached, the
resistance will increase and cause tingling.
② Whether there is pimple, broken skin or
To Next Page
Loading...