(2) Click “Login” to enter the setting page.
If the router auto recognize the APN and already connect to
internet, then you do not need to add APN info.
If the router does not recognize the APN, then you need to add
APN manually. Pls select Device Settings--WAN Settings--APN,
fill in the APN info. Pls make sure the APN setting is correct.
Incorrect APN will cause internet connection failed.
If the device works fine, you
’
d better not change the parameter. If
you have poor experience or can’t access Internet after changing the
parameter, then please press and hold the reset button for more than
7 seconds to restore the factory settings.
Home
gateway
information
status
Router running status info, such as
running hours, LTE network, SIM,
WAN, LAN, WLAN info
Current terminal connections, MAC,
IP
Check the router's software and
hardware version number.
Check LTE details info, including
frequency, cell, RSRP, SINR, RSRQ
etc.
Network selection: Auto, 4G Prefer,
4G Only, 3G Prefer, 3G Only, etc.
APN Setting
IPV4 / IPV6: Set router IP stack
support model. The default setting is
IPV4 / IPV6 dual stack.
PIN, MTU, DNS Settings
DHCP: Set the router’s DHCP info and
IP info. Once turn off the DHCP, the
user has to set IP manually, and it can
not obtain the IP automatically.
Keep address
IPV6 address allocation, PNAT
function.
Ports filtering, IP address filtering,
URL Filtering,.
MAC binding,
Change password, username, device
reboot settings and runtime.
LTE module software update
Update router system setting
To Previous Page
Loading...
Need help?
General
