Yeacomm P11 User Manual

YEACOMM P11 User Manual
Thank you for choosing Yeacomm YF-P11 4G wireless router,
please read and keep the user manual carefully.
1. Main Technology Parameters
●
Working temps : -30
℃
-- +60
℃
●
Relative humidity: 5%--95%
●
Working frequency :
LTE: B1/2/3/5/7/8/20/38/40
LTE: B1/2/3/5/7/8/28/38/39/40/41(Optional)
●
Power supply : input AC :100V~240V
，
50Hz~60Hz
Output DC: 15V, 500mA
●
Size:252mm*112mm*58mm
●
Weight: 560g
●
Rate of uplink and downlink: LTE(Cat 4) 150Mbps/DL
；
50Mbps/UL
2. Product Interface and Indicator
2.1 Product interface
2.2 Indicator
Type
Status
Description
RF
All off
no signal (the signal status can be
checked in the terminal configuration
page)
One on
Signal is poor
Two on
Signal is moderate
Three on
Signal is good
All on
Signal is very good
SYS
Off
Power abnormal, the router power off
On
Power normal, the router power on
SIM
Off
No SIM or can not detect SIM card
On
Device read the SIM normally
ETH
Off
Device doesn't connect to PC
On
Device connects to PC
RUN
Off
Device is not running
On
Device is running
3. Installation
3.1 Insert the sim card as below. When you hear a clicking sound,
it means that the USIM card has been installed successfully.
3.2 Connect the power adapter’s POE port to outdoor cpe router’s
POE port by Cate5e cable.
3.3 Place the unit outside in open space, the front panel face to the
base station. Make sure the unit is fixed well.
3.4 Power on the device, the system will automatically runs in 1~2
minutes.
Attention:
1) Do not insert the SIM card or remove it if power is
connected to the device.
2) Please use the power adapter that came with the device.
4. Quick Config Guide
Connect your PC to the router via Ethernet port. The router supports
Windows XP, Windows 7/8/10, MAC OS, Linux, Android and so on.
First Step
：
(1) Make sure the computer obtain IP address automatically. Once
the computer get IP, input CPE IP address into the browser,
press
“
enter
”
to access CPE home page. Pls see the username
and password as follows:
Web: 192.168.0.1
Username: admin
Password: admin

Yeacomm P11 Specifications

General

Brand	Yeacomm
Model	P11
Category	Wireless Router
Language	English

Summary

Main Technology Parameters

Working Temperature and Humidity

Specifies the operational temperature range (-30°C to +60°C) and relative humidity (5%-95%).

Working Frequency

Details the LTE frequency bands supported by the device, including optional bands.

Power Supply Specifications

Lists input AC voltage (100V-240V) and output DC voltage/current (15V, 500mA).

Physical Dimensions and Weight

Provides the physical size (252mm*112mm*58mm) and weight (560g) of the device.

Data Transfer Rates

Indicates the uplink and downlink speeds for LTE Cat 4 connections.

Product Interface and Indicator

Product Interface Overview

Details the physical ports and connectors on the device, including POE and SIM slots.

Indicator Status Descriptions

Explains the meaning of different LED indicator states for RF, SYS, SIM, ETH, and RUN.

Installation

SIM Card Installation

Provides instructions on how to insert the USIM card into the device.

Power and Network Connection

Guides on connecting the power adapter's POE port and placing the unit outdoors.

Power On Procedure

Describes the automatic system startup process after powering on the device.

Quick Config Guide

Initial PC Connection and IP Configuration

Steps to connect a PC, obtain an IP address, and access the device's web interface.

APN Configuration Guide

Instructions for automatically recognizing or manually adding APN settings for internet connectivity.

Router Setting

IP Stack and DNS Settings

Configuration for IPV4/IPV6 support, PIN, MTU, and DNS settings.

DHCP Configuration

Settings for the router's DHCP server, IP information, and address allocation.

SMS Functionality

Options for sending, receiving, and managing SMS messages via the device.

Firewall and Filtering

Configuration for ports, IP addresses, and URL filtering to enhance security.

System Status and Management

Sections for checking system logs, rebooting, updating firmware, and managing device settings.

LTE Information

Displays detailed LTE network information including signal strength and cell data.

Device Settings

Includes network selection (Auto, 4G/3G), APN settings, and other device configurations.