Yealink EXP40 Quick User Guide

! ! !
!
Rev 1 Copyright © 2015. Star2Star Communications, LLC. All rights reserved. Star2Star is a registered trademark of Star2Star Communications.
! ! !
c). Connect cords
!
Plug the connecting cord into the Ext jack of the IP phone (the next port to the Ext in jack of
the first module). To connect more than one module, plug another cord into the Ext out jack
and the other port to the Ext in jack of the second module.
Note: Users can connect up to six modules. Connect the Ext in port of the previous module
and the Ext out port of the next module with a connecting cord.
Attach the stand and power adapter. Connect handset and headset to use.
d). Configuration
!
The expansion module EXP40 has 40 programmable keys that can be configured via the
Star2Star web portal. Each screen displays 20 keys. You may press or to switch
between the two pages.
You may use the Star2Star web portal to configure key functions, i.e. monitor the presence
of local extensions, speed dials, numbers you call on a regular basis.

Yealink EXP40 Specifications

General

Product color	Black
Number of buttons	20 buttons
Compatible products	SIP-T46G, SIP-T48G
Keypad illumination	Yes
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Weight	6700 g
Dimensions (WxDxH)	127 x 213 x 167 mm