www.yealink.com
6
De-registration
1. Long press the program key and reconnect the power adapter.
2. Hold the program key until the three LEDs turn red.
When the DECT LED flashes red, and the de-registration is successful.
To achieve optimum performance for the repeater, it is important to find a
appropriate location.
1. Hold the handset and stand near the base.
2. Make a call, and carry the handset away from the base.
3. Make a note where you start to hear noise on the line, which indicates the
signal strength is getting weaker.
The optimum location for the repeater is as far from the base as possible
while still maintaining a good signal, or just inside the location where the
noise became noticeable.
Here are a few tips for placing repeaters:
• Choose a raised position for both the base station and repeater wherever
possible.
• When positioning the repeater, avoid obstacles that can interfere with radio
transmission, such as thick wall and metal structures.
• Place the repeater away from other electrical appliances, such as microwave
ovens, Wi-Fi equipment and computers.
• Keep a minimum of 10 meters between multiple repeaters to avoid
coverage overlapping.
Placement
To Next Page
Loading...
Need help?
General
Weight and Dimensions
