Yealink SIP-T32G User Manual

Advanced Phone Features
91
when it automatically answers an incoming intercom call. You can also enable the
phone to automatically answer an incoming intercom call while there is already an
active call on the phone, the active call is placed on hold.
Intercom features you need to know:
Intercom features
Description
Accept Intercom
Allows you to enable or disable the IP phone to
automatically answer an incoming intercom call.
Intercom Mute
Allows you to enable or disable the microphone on
the IP phone for Intercom calls.
Warning Tone
Allows you to enable or disable a warning tone when
the phone receives an incoming intercom call.
Allow Barge In
Allows you to enable or disable the IP phone to
automatically answer an incoming intercom call
while there is already an active call on the phone.
To configure intercom features via phone user interface:
1. Press Menu->Features->Intercom.
2. Make the desired changes.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure these specific parameters via web user interface at the path
Phone->Features->Intercom Settings.
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom call.
If Accept Intercom is enabled, the phone automatically answers an incoming intercom
call. If Accept Intercom is disabled, the phone rejects incoming intercom calls and sends
a busy signal to the caller. Accept Intercom is enabled by default.
Note
Your administrator can set a time period delay before the phone automatically answers.
Contact your system administrator for more information.

Yealink SIP-T32G Specifications

General

Keypad number of keys	32
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	400 x 240 pixels
Display number of colors	262144 colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g