Yealink SIP-T32G User Manual

User Guide SIP-T32G IP Phone
66
The phone LCD screen shows the call is on hold and the line key LED flashes green.
Note
To resume a held call:
1. Press the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, press or to switch between the calls, and
then press the Resume soft key to retrieve the desired call.
If more than two calls are on hold, an indication appears on the LCD screen, for
example "2/4", indicating that this is the second call out of four calls.
If multiple calls are on hold on more than one line keys, you can view the details of the
calls by pressing the corresponding line key, and then press the Resume soft key to
retrieve the call.
You can use the DND feature to reject the incoming calls automatically on the phone
and the callers can hear a busy signal or a message depending on your server.
To activate DND feature on the SIP-T32G IP phone:
1. Press the DND soft key when the phone is idle.
The phone will beep softly every 30 seconds to remind you that you still have a call on
hold.

Yealink SIP-T32G Specifications

General

Keypad number of keys	32
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	400 x 240 pixels
Display number of colors	262144 colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g