Yealink SIP-T32G

User Guide SIP-T32G IP Phone
68
a.) If you select Always Forward:
1) Press or , or the Switch soft key to select Enable from the
Always field.
2) Enter the destination number you want to forward all incoming calls to
in the Forward to field.
3) (Optional.) Enter the always forward on code or off code respectively
in the On Code or Off Code field.
b.) If you select Busy Forward:
1) Press or , or the Switch soft key to select Enable from the Busy
field.
2) Enter the destination number you want to forward all incoming calls to
when the phone is busy in the Forward to field.
3) (Optional.) Enter the busy forward on code or off code respectively in
the On Code or Off Code field.
c.) If you select No Answer Forward:
1) Press or , or the Switch soft key to select Enable from the No
Answer field.
2) Enter the destination number you want to forward all unanswered
incoming calls to in the Forward to field.
3) Press or , or the Switch soft key to select the ring time to wait
before forwarding in the After Ring Times field (The default ring time is
60 seconds).