Yealink SIP-T32G User Manual

User Guide SIP-T32G IP Phone
86
To place a call on hold:
1. Press the shared line key or the Hold soft key when there is an active call on the
shared line.
The shared line key LED illuminates flashing when the shared line call is placed on
hold. For more Shared Line key LED indications, refer to LED Instructions on page 5.
To retrieve a call placed on hold:
Do one of the following:
- Press the Resume soft key on the hold phone when there is a public held call on the
shared line.
- Press the shared line key on any other phone that shares the line when there is a
public held call on the shared line.
To barge in a shared line call:
1. Press the shared line key on any other phone that shares the line when there is an
active call on the shared line.
For more shared line key LED instructions, refer to LED Instructions on page 5.
You can record calls by pressing a record key on the SIP-T32G IP phone. There are 2
different ways of configuring call recording and they even work differently:
 Record: The phone sends SIP INFO message containing a specific header to trigger
a recording.
 URL Record: The phone sends HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
Note
To configure a Record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
The record feature is not available on all servers. Contact your system administrator for
more information.

Yealink SIP-T32G Specifications

General

Keypad number of keys	32
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	400 x 240 pixels
Display number of colors	262144 colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g