Barracuda Phone System
Yealink T32G/T38G IP Telephone Quick Reference Guide
1 / 3
Yealink T32G/T38G IP Telephone Quick Reference
Guide
This article explains the basic operation of the Yealink T32G and T38G IP telephone.
Yealink Model T38G
Soft Keys
The four buttons immediately below the LCD display are soft keys.
Each soft key performs the action displayed immediately above it.
Soft key behavior is context sensitive – the associated soft key action changes according to current
phone state.
Place a Call
Lift the handset, press the speakerphone button or headset button.
Dial the number, then press the Send soft key.
Redial
To redial the last number, press the RD button twice.
To view previously dialed numbers, press the RD button once and then use the up and down arrow keys
to scroll through the list. Press the Send soft key to dial the highlighted phone number.
Voicemail Access
To access voicemail messages, press the Message button.
Depending on your system configuration, you may be prompted for a voicemail PIN number.
Call Hold
To place an existing call on hold, press the Hold button or the Hold soft key.
To retrieve a call on hold, press the Resume soft key.
If multiple calls are on hold, press the appropriate line key before pressing Resume.
Call Transfer
To transfer a call in progress, press the Tran or Transfer soft key.
Dial the destination number, then press the # key.
When the destination party answers, announce the caller, then press the Tran or Transfer soft key to
complete the transfer.
If there is no answer, press the Cancel soft key and then the Resume soft key to return to the original
caller.
To Next Page
Need help?
General
