Yealink W56H Manual

2
Power over Ethernet
+ Connect the Ethernet cable between the Internet port on the base station and an available port on the in-line power
switch/hub.
IEEE 802.3af compliant
PoE Hub/Switch
NOTE: If in-line power is provided, you don’t need to connect the AC adapter. Make sure the hub/switch is PoE compli-
ant.
IMPORTANT! Do not remove the power and network to the base station while it is updating firmware and configurations.
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative

Yealink W56H Specifications

General

Type	DECT telephone handset
Speakerphone	Yes
Compatibility	Yealink W56P
Number of melodies	9
Phonebook capacity	100 entries
Brand compatibility	Yealink
Redial list capacity	20
Headphone connectivity	3.5 mm
Number of ringer volume levels	5
Display type	LCD
Product color	Black, Silver
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Standby time	400 h
Battery technology	Lithium
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Harmonized System (HS) code	85177900

Weight and Dimensions

Depth	53 mm
Width	176 mm
Height	23 mm