Yealink WF50 - Introduction; Package Contents; Assembling the Wi-Fi USB Dongle

1
Wi-Fi USB Dongle WF50 is used in two scenarios:
For IP phone/VCS system: connect to the wireless network.
For VCS system: provide wireless AP (Access Point) for other
devices.
Assembling the Wi-Fi USB Dongle, as shown below:
Introduction
Package Contents
WF50
User Guide
Assembling the Wi-Fi USB Dongle
Note: Not all IP phones and VCS system support WF50. For more
information, contact your system administrator.
IP Phone: