Yealink WF50 - Connecting to the Wireless Network; Connecting to Wireless Network; Providing Wireless AP for Other Devices; Providing Wireless AP

2
Connecting to the Wireless Network
To connect to an available wireless network (take the SIP-
T46S phone for example):
1. Assembling the WF50.
The LCD screen prompts “Wi-Fi adapter has been added,
scanning the available wireless network right now?”
2. Press the OK soft key.
3. Select X available network(s).
4. Select the desired wireless network and then press the
Connect soft key.
5. (Optional.) Enter its password in the Password field.
6. Press the OK soft key.
Once the connection has completed successfully, the icon
appears after the SSID.
To check the AP information via the remote control:
1. Assembling the WF50.
The display device prompts: "Wifi adapter is connected"
2. Navigation to More->Setting->Advanced->WiFi hotpot.
VCS System:
Providing Wireless AP for Other Devices