The Yealink USB Connect device manager client manages Yealink USB devices such as a WH62/WH63 and WH66/WH67 USB
headsest.
The USB device manager is compatible with the Window 8 and above and macOS. Yealink USB Connect does not currently support
running on a PC with the Apple M1 chip.
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Representative
GETTING STARTED
To get started, you will need to download the USB device manager client from the Yealink website. Click on the following link to
begin the download process: www.yealink.com/product/yuc.
+ Select your operating system and the USB Connect start up wizard will
display.
+ Follow the wizard to complete the download.
1. Read and Accept the End User
agreement and click NEXT.
2. On the Welcome to the Wizard screen,
click NEXT.
3. Select the installer folder and click
NEXT.
4. On the Ready to Install screen, click
INSTALL.
5. On the Complete the Setup Wizard
screen, click FINISH.
6. Plug your USB device into your PC. The
Yealink USB Connect App appears
with settings for your connected device.
QUICK REFERENCE GUIDE
Yealink USB Connect
For Compatible Yealink Headsets
February 27, 2024
To Next Page
Need help?
General
Weight and Dimensions
