yeedi K700 - Page 26

26
EN
6. Troubleshooting
No. Malfunction Possible Causes Solutions
3
The robot gets stuck while
working and stops�
The robot is tangled with something on the oor
(electrical wires, curtains, carpet fringing, etc�)�
The robot will try various ways to free itself� If it is
unsuccessful, manually remove the obstacles and restart�
4
The robot returns to the
Docking Station before it has
nished cleaning�
When the battery gets low, the robot
automatically switches to Return to Charger
Mode and returns to the Docking Station to
recharge itself�
This is normal� No solution necessary�
Working time varies according to oor
surface, room complexity and the Cleaning
Mode selected�
This is normal� No solution necessary�
5
The robot does not clean the
whole area�
The cleaning area is not tidy�
Remove small objects from the oor and tidy up the
cleaning area before the robot starts cleaning�