SECTION 2 - SPECIFICATIONS
Main Viewing Field
Side Viewing Field
Reaction Time
Available Shades
All Shades Provide
Continuous UV And IR
Protection.
Sensitivity/Grind Mode
Control
Delay Control
Automatic Power Off
Low Battery Indicator
Power Supply
Sensors
Operating Temperature
Storage Temperature
Total Weight
Standards
Warranty
Page 03
IOOx83mm / 3.93<3.23 inch
/ inch
(DIN5, non auto-darkening)
1/10000 sec (0.0001 sec)
Weld Mode
Darkened State: No 9-No. 13
Light State: No. 4
Cut Mode
Darkened State: No. 5-No. 9
Light State: No. 4
Grind Mode
Light State: No. 4
UV And IR Protection DIN16
Adjusts for varying ambient light and
welding arc
Slows lens dark-to-light state between 0.1
and 0.8 seconds
Shuts lens Off 15-20 minutes after last
arc is struck
Red LED light illuminates to indicate 2-3
days remaining battery life
CR2450 Lithium Batteries
Independent/Redundant (Four)
140F to 1310F / -100C to +550C
When stored in extremely cold
temperatures, warm helmet to ambient
temperature before welding.
-40F to 1580F / -200C to +700C
When stored in extremely cold
temperatures, warm helmet to ambient
temperature before welding.
620g (1 lb 60z.)
ANSI ISEA Z87.1-2015 and CSA
1 year from date of purchase
To Next Page
Loading...
Need help?
General
