YEYIAN SIGURD 4000 User Manual

STAND INSTALLATION
1. Open the cardboard box, take the foam out and lay it at on the table top.
2. Take the cable clip, adjustable stand stem and stand base out.Remove the foam
covering the bottom of the monitor. Slide the cable clip down the back of the
adjustable stand stem to attach it to the adjustable stand stem.Use the screw to
fasten the stand base to the adjustable stand stem.
Stand Base
Adjustable Stand Stem
Cable Clip
Screw
3. Press the button to remove the stand cover, and use two screws to install the
adjustable stand stem.
Stand Plate
Button
Screws

YEYIAN SIGURD 4000 Specifications

General

Brand	YEYIAN
Model	SIGURD 4000
Category	Monitor
Language	English