EasyManua.ls Logo

YF BEAM 230 - Installation

YF BEAM 230
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Guangzhou Yingfeng Lighting Equipment Co.,Ltd www.yf-light.com
3
4. Lamp
5R Philips/7R Osram
5. Bulb power
189W/230W
6. Strobe
1-13times/second
7. Color temperature
8000K
8. Horizontal scanning 540 degrees, Horizontal 16 bit, electronic error correction, vertical
scanning 270 degrees, vertical 16 bit, electronic error correction.
9. Gobo
17 gobo add white and stream effect,gobo electric focus function
10. Color
14 color add white and rainbow effect
11. Effect
Can transfer from beam into atomization effect
12. Panel Control
Touch screen control and Manual control
13. Signal Control
DMX512 international standard signal
14. Safety protection: when the machine is overheating or the system malfunctioning it will
automatically cut off power supply.
4Installation
1. Before install, please make sure the power supply is the same as the product identified.
2. The cable connecting to the main power supply must meet the requirements, should not
overload.
3. The installation must be done by professional person, fixed the light safely and reliable, and
transferred to appropriate irradiation angle.
4. Please ensure that the draft fan and exhaust channel is not blocked
5. At the bottom of the moving head light with insurance line connection hole, based on safety
reasons, please use the insurance rope which can withstand ten times the weight of the
Moving head through the insurance line connection hole for auxiliary lifting.
6. When install this equipment , please ensure that at least 1.5 meters range no extreme
inflammable and explosive items(ornaments, etc.) ensure the moving head light and the wall
interval twenty centimeters of above.
7. This product can be fixed hanging installation and put on the floor to use.
8. Based on the safety, please make sure the earth wire grounded.
9.The Pan and Tilt of this product was locked when packing, please ensure it was unlocked
before the power on.