Yitong Technology YTMC-51N2-M3 User Manual

YTMC-51N2-M3 MoCA 2.5 Adapter
5
Connecting Additional Adapters
If necessary, additional Adapter scan be placed at locations around the home or
office that need an Ethernet Internet connection, but currently only have a
coaxial port.
To connect additional Adapters:
1. Find a coaxial wall port near the desired location and unplug the
coaxial cable connected to the TV or set-top box. If no device is
plugged into this coaxial wall port, skip to step 3.
2. Connect the end of the coaxial cable removed in step 1 to the TV
coaxial port on the side of the Adapter.
3. Connect a coaxial cable into the coaxial wall port indicated in
step 1.
4. Connect the other end of the coaxial cable installed in step 3 to
the MoCA port on the side of the Adapter.
5. Connect one end of an Ethernet cable into the Ethernet port of
the device to connect to the Internet.
6. Connect the other end of the Ethernet cable into the Ethernet
port on the side of the Adapter.
7. Plug the provided power adapter into the Power port on the side
of the Adapter.
8. Plug the other end of the power adapter (external) into an
electrical outlet.
9. Make sure the Power, Ethernet and MoCA lights are solid green.

Yitong Technology YTMC-51N2-M3 Specifications

General

Brand	Yitong Technology
Model	YTMC-51N2-M3
Category	Adapter
Language	English