5. System Functions After Upgrade
5-17
TI 33K01B10-50E
Table Functions Available in Computational Function
Type
Function
Description
CENTUM V CENTUM-XL Upgraded FCS
Arithmetic
function
SQRT SQRT sqrt Square root calculation
– EXP power
Exponential calculation (EXP is the exponential
function of “e,” the base of natural logarithm.)
– LN log Natural logarithm
– LOG – Logarithm to the base 10
– SIN sin Sine function
– COS cos Cosine function
Numeric
processing
AVR2 to 6 AVR2 to 6 – Average of argument-2 to -6
SMH/SMHC
SMM/SMMC
SMS/SMSC
– –
Totalization by hour/minute/second
Same as SUM calculated by function block.
– SC – Scale conversion
Logic operation
IOR IOR Operator “or” Logical OR
IAND IAND Operator “and” Logical AND
IEOR IEOR Operator “eor” Exclusive OR
NOT NOT Operator “not” Negation
Absolute value ABS ABS labs/dabs Absolute value calculation
Round-off ROUD ROUD – Returns the round-off result of data.
Compare and
extract
CPGT CPGT lmax/dmax Returns a larger value.
CPLT CPLT lmin/dmin Returns a smaller value.
CPAG CPAG – Returns the larger in absolute.
CPAL CPAL – Returns the smaller in absolute.
Corrective
calculation
TPC TPC TPCFL Temperature and pressure compensation (*1)
TC TC TPCFL Temperature compensation (*1)
PC PC TPCFL Pressure compensation (*1)
– ASTM1 ASTM1 ASTM compensation (Old JIS) (*1)
– ASTM2/3/4 ASTM2/3/4 ASTM compensation (New JIS) (*1)
*1: The old FCS uses normalized data of 0 ~ 1, but the upgraded-FCS calculates data with an engineering quantity as is.
Mar. 27, 2015-00
To Next Page
Loading...
Need help?
General
