Need help?Do you have a question about the YOKOGAWA Centum VP and is the answer not in the manual?
General| System Type | Distributed Control System (DCS) |
|---|---|
| Architecture | Client-Server |
| Control Network | Vnet/IP |
| Controller Type | FCS (Field Control Station) |
| Programming Languages | Function Block Diagram (FBD), Sequential Function Chart (SFC), Ladder Diagram (LD), Structured Text (ST) |
| Operating System | Real-time OS (for Controllers) |
| Redundancy | Controller, Communication Network, Power Supply |
| I/O Modules | Analog I/O, Digital I/O |
| Communication Protocols | Modbus, OPC, Foundation Fieldbus, Profibus, HART |
| Scalability | From small to large applications |
| Security | User Authentication, Authorization, Audit Trail |
| Integration Capabilities | OPC UA, Modbus, Ethernet/IP |
Guidelines for control room layout, strength, illumination, and ventilation.
Environmental conditions for operation, including temperature, humidity, vibration, and air purity.
Requirements for stable system operation, including voltage, frequency, waveform, and noise.
Procedures for grounding devices to prevent electric shock and minimize noise.
Measures to prevent noise induction from various sources like electromagnetic fields and static electricity.
Procedures to prevent electrostatic damage when handling sensitive components.
Rules for laying power and signal cables, including separation and distance.
Product compatibility with corrosive gas environments and classification of gas levels.
List of safety and EMC conformity standards the system complies with.
Standards for equipment used in hazardous locations.
Compliance with marine standards like ABS, BV, LR, and DNV GL.
Table of environmental requirements for installation, including temperature and humidity.
Guidelines to prevent damage during equipment transport, including loading and handling.
Inspection procedures for received equipment to prevent damage and condensation.
Conditions and locations for storing products to maintain integrity.
Guidelines for determining space around equipment for operation and maintenance.
Methods for installing equipment on various floor types and arranging cabinets.
Procedures for installing multiple cabinets together, including leveling and interconnection.
Instructions for mounting devices in a 19-inch rack, including spacing and heat radiation.
Guidelines for mounting devices to a DIN rail, including space and orientation.
Procedures for mounting devices to a wall, including space for heat dissipation and servicing.
Recommendations for flexible cables and proper terminal connections for system equipment.
Specifications for conductor cross-sectional area and examples of suitable power cables.
Specifications for conductor cross-sectional area and examples of suitable grounding cables.
Procedures for power cable termination using solderless lugs and sleeve terminals.
Guidelines for connecting signal cables to I/O modules, including process I/O and specific module types.
Power consumption, voltage, frequency, and heating values for CENTUM VP components.
Data on measured in-rush current for components during power-on, including measurement conditions.
Table detailing maximum current consumption for FIO modules across different voltage inputs.
Table detailing maximum current consumption for N-IO modules across different voltage inputs.
Recommended breaker ratings for built-in and external protection for system components.
Recommended replacement intervals for parts with defined life spans, considering operating environment.
Items to inspect after installation before powering on, focusing on environmental factors.
Precautions to maintain the proper operating environment after installation, including HVAC and humidity control.
To Next Page
