YOKOGAWA Centum VP - Connecting Signal Cables with Analog I;O Module; KS Cable Interface Adaptor; Signal Names and I;O Signals of Analog I;O Module

3. Cabling
3-65
TI 33J01J10-01EN
n KS Cable Interface Adaptor
F030604.ai
Figure I/O Module with KS Cable Interface Adaptor

n Connecting Signal Cables with Analog I/O Module
󰀨
listed below:
Table Signal Names and I/O Signals of Analog I/O Module
Model
Name
Single
Name
I/O Signal
AAI141
AAI841
AAI143
INA
2-wire transmitter input + Current input -
–
INB
2-wire transmitter input - Current input +
AAI135
AAI835

INA
2-wire transmitter input + –
–
INB
2-wire transmitter input - Current input +
INC
– Current input -
AAR145

INA
Resistance temperature detector input A Potentiometer input, 100%
–
INB
Resistance temperature detector input B Potentiometer input, 0%
INC
Resistance temperature detector input B 
AAP135
INA
2-wire power supply source –
3-wire power supply
source
INB
2-wire power supply signal  3-wire power supply +
INC
–  3-wire power supply -
 is channel number.
 󰀨
 
 
 A and INB must be identical.
Oct. 5, 2018-00